FS70x28-1 HANGER RAIL 
FS70x28-1.2 HOOK RAIL 
FS70x28.3 HANGER RAIL 
FS70x28-5 HANGER RAIL 
FS70x28-5.2 HOOK RAIL 
FS70x28.7 HANGER RAIL 
FS70x28.9 HANGER RAIL 
FS70x28.9.2 HOOK RAIL 
FREE STANDING RAILS 
COAT STANDS 
MOBILE RAILS 
WG240 Wardrobe Rail 
R.8235 Wardrobe Rail 
R.8231 Wardrobe Rail 
W40 Wardrobe Rail 
GSRN20 Wardrobe Rail 
GSRNS30 Wardrobe Rail 
GSUN18 Wardrobe Rail 
GSUN18 Wardrobe Rail 
HOOK RAILS 
COAT HOOKS 
WALL RAILS 
SPACE SAVING 
Wall Mounted Umbrella Racks 
Free Standing Umbrella Racks 
Mobile Umbrella Racks 
SST Umbrella Stand 
TOWEL HOOKS 
SOAP DISPENSERS 
SHELVES 
TOILET ROLL HOLDERS 
TOILET BRUSH SETS 
SENSOR TAPS 
TOWEL RAILS 
TOWEL DISPENSERS 
WASTE BINS 
SIGNAGE 
HAND DRYERS 
BABY CHANGERS
01376 502 131
CONTI+ Lino Sensor Tap
The Lino touch-free, electronically controlled sensor tap with or without mixer.
A sturdy single-piece modular design without a separate installation box, in a polished chrome finish.
The Lino sensor tap sets new standards in ease of function – very suitable for residential use. lino is not only a feast to the eye but easy to operate as well. Water flows only when needed – economical and convenient. Thanks to touch-free performance, faucet and sink stay germ-free and clean longer.
SOLino – a world innovation – from the sun or artificial sources – the special “solar energy module” optimally operates in any light and allows a battery life-time up to 8 years. Easy installation and maintenance – just as with conventional fixtures.
Function Key – this unique, patented touch button adds such practical features as “temporary-off” for undisturbed cleaning or “permanent-on” for convenient filling of the sink with a “continuous run” and optional 24-hour hygienic rinse.
Features:
- WRAS approved
- Modular single-piece design, without separate installation box, sturdy brass housing, chromed
- Infrared sensors with automatic setting feature, electronic microprocessor
- Reliable solenoid valve (minimal level of water pressure surge) and economy aerator
- Water supply connection with flexible high-pressure hoses
- Check valves and built-in filters
- Temperature adjustable or fixable (vandal-proof construction)
- Scald protection adjustable
- Reliable solenoid valve (minimal level of water pressure surge) and economy aerator
- Water supply connection with flexible high-pressure hoses
- Check valves and built-in filters
- Temperature adjustable or fixable (vandal-proof construction)
- Scald protection adjustable
- Temporary-off (cleaning) and continuous water flow time (filling of basin) activated by function key
- Continuous water flow time and hygienic rinse water flow time adjustable with function key
- Follow-up time and sensor sensitivity adjustable with function key
- 12,24 or 48-hour hygienic rinse activatable with function key
- Installation similar to conventional single-lever faucet
- Compatible service monitor: control of stored operational data, settings and control functions
Technical:
- Operating pressure: 0,3 – 10 bar
- Flow rate: approx. 6 l/Min. (3 bar)
- Max. water temperature: 80° C
- Aerator: economy aerator, cascade (self-cleaning)
- Flexible hoses: 35 cm
- Angle valve connection: G 3/8´´
- Filters: 0,5 mm mesh size
- Sensor-sensitivity: automatic self-adapting sensor technology
- Follow-up time: 1 sec. pre-set (adjustable with iqua-click 0 – 10 sec.)
- Continuous water flow and
hygienic rinse time: 2 Min. pre-set (adjustable with iqua-click 0,5 – 20 min.) - Temporary-off: 2 min. (fixed)
- Engineering standards: DIN EN 200
L10 – With Mixer
L20 – Without Mixer
